Digikey
Part |
Description |
Digikey |
Spudger |
Doesn’t really mar delicate surfaces, useful as a prying tool for delicate electronics |
‘Desco’ Menda Series 35622 |
8-pin SOIC Clip |
Directly clips onto surface mount 8-pin ICs. Useful for unbricking C720 Chromebooks and re-programming/flashing other chips without desoldering. |
Pomona 5250 Test Clip |
LEDs (seperated by size)
3mm
(Haven’t tested any 3mm LEDs yet, open for contributions)
5mm through-hole
Part |
Description |
Digikey |
Kingbright Green LED |
Diffused Vf=2.2v I=20mA 40mcd |
754-1735-ND |
Kingbright Yellow LED |
Diffused Vf=2.1v I=10mA 20mcd |
754-1284-ND |
Kingbright Red LED |
Diffused Vf=2v I=10mA 45mcd |
754-1264-ND |
(To be filled, contributions welcome)
Connectors
SMA Connectors
Part |
Description |
Digikey |
SMA edge mount/end launch connector |
This doesn’t have a datasheet for some reason (as of 2016-09-26), but it fits boards with 1.6mm of thickness. |
CON-SMA-EDGE-S-ND |
JST-PH
Part |
Description |
Digikey |
Right-angle JST-PH connector |
Fits (w/tiny offset) into a breadboard for prototyping with batteries that are terminated with a JST connector |
455-1719-ND |
Resistors
Part |
Description |
Digikey |
100 ohm |
1/4W 5% |
100QBK-ND |
Surface mount
0603 (imperial) resistors
Part |
Description/Notes |
Digikey |
0 ohm |
Jumpers on prototype boards. (not a superconductor as purchased) |
5,000 @ $3.90 (2/20/14) 1276-3510-2-ND |
10k ohm |
Sneeze and lose a couple? No problem. |
5,000 @ $6.56 (2/13/14) 311-10KGRTR-ND |
Switches
Breadboard-friendly
Part |
Description/Notes |
Digikey |
MJTP1250 |
SPST switch, thin profile and sits flush |
679-2453-ND |
Capacitors
(To be filled, contributions welcome)
Diodes
(To be filled, contributions welcome)
Microcontrollers
(To be filled, contributions welcome)
Transistors/BJT: Through-hole
Transistors/BJTs: Surface mount
Misc